永磁除鐵機是對原料中鐵性雜質進行去除的磁選設備，而它也是由金屬零件組成的設備，只要使用，時間長了都會出現故障或需要維護保養，要定期進行檢修，以保證除鐵機的正常運作，保證除鐵機的除鐵效果，作為一家專業的，負責的除鐵機生產制造商，有必要為用戶介紹下永磁除鐵機的檢修程序，以確保用戶安全，規范地完成設備的檢修。

Permanent magnetic iron removing machine is the removal of the magnetic separation equipment for raw material of iron impurities, and it is made of metal parts of the equipment, as long as the use of a long time, there will be a failure or maintenance, regular maintenance, to ensure the normal operation of the machine in addition to iron, ensure the effect of removing iron iron removing machine, as a professional manufacturer, in addition to iron machine, it is necessary for the user to introduce permanent magnet in iron machine maintenance procedure, to ensure the safety of users, to complete standard equipment maintenance.

1.檢修前首先要通知調度室，待帶式輸送機物料運行停車后，方可進行除鐵設備的檢修工作。

1 overhaul before the first notice to the dispatch room, after the belt conveyor to stop the operation of materials, before the removal of iron equipment repair work.

2. 待帶式輸送機停下后，將帶式輸送機頭操作箱“就地”、“集空”主令開關打到“停車”位置，并掛“停車牌”，以防不知情人士開機運作，造成危害。

2 to stop the belt conveyor, the belt conveyor head operation box "in place", "empty" master switch to "stop" position and hang "parking card", to prevent insider boot operation, harm.

3.在永磁除鐵機控制柜上給除鐵設備停電，并在操作按鈕上掛“有人工作禁止合閘”的停電告示牌。

3 in the permanent magnet iron removing machine control cabinet for iron removal equipment power, and on the operation button hanging on "people work f no switching power outage signs.

4. 檢修完成后將除鐵機上落下的鐵器全部清理干凈，恢復除鐵機送電，摘除機頭操作箱“停電牌”將主令開關打到“集控”就地力位置通知調度恢復生產。

4 maintenance after the completion of the iron removing machine of falling iron all clean, in addition to restore power transmission iron removal machine, machine operation box "Blackout" brand R and the master switch to "control" is shown productivity position notice to resume production scheduling.

以上介紹的是永磁除鐵機日常使用中進行檢修的程序，希望對您有所幫助。

The above is the permanent magnet iron removal machine used in daily maintenance procedures, I hope to help you.